Dos and don’ts
The inhalation of the dust generated by certain DIY activities could be harmful to your health in the long term.
Here is some simple advice on how to minimise dust exposure when MIXING different materials.
- Do this operation outdoors as far as possible or ventilate the room in which you are operating: open the windows
- Pour the powders gently and close to the receiving container (e.g. bucket) to avoid the formation of dust
- Favour wet mixes/preparations when possible
- Use a face mask to prevent dust being inhaled, preferably with a protection factor FFP 2 or 3 if available
- Make your mix in an enclosed unventilated space
MINIMISE DUST !
The inhalation of the dust generated by certain DIY actions can be harmful to your health in the long term
Avoid the spread of dust by keeping internal doors closed in order to prevent dust spreading to other rooms.
Capture dust at source before you are exposed to it, e.g. using tools with on board dust extraction.
Replace contaminated air with clean air by ventilating the room(s) by opening the windows. Carry out dusty jobs outdoors in the fresh air as much as possible. Take a break after dusty tasks, allowing time for the air to clear.
Keep processes wet to prevent dust becoming airborne. Wet surfaces before you drill or cut them. Preferably, use hand-held machines with water supply, e.g. disc cutters.
GOOD HYGIENE / HOUSEKEEPING
Remove or cover soft furnishings before work.
Wash your clothes when they get dusty and vacuum up dust produced by your activities.
Use vacuum or wet cleaning. Avoid dry brushing.
Use a face mask to prevent dust being inhaled, preferably with a protection factor FFP 2 or 3 if available (indicated on the label of the mask). Ensure the mask fits the face correctly to provide a good seal.
Preferably, carry out this work outside. Wear a mask.
Spray painting can expose users to fine particles in suspension. Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.